Photo Datalignum taken at Vitap's booth in Xylexpo.
At the last Xylexpo, Vitap showed the edge bander machining center Eclipse. Here are the most important technical features.
For shaped “concave and convex “ panels 10-60 mm thickness and 1-3 mm band thickness GLUEING STATION with: - Glue and tape application on big and small shaped panels. - Equipped with glue pot with 1 Kg capacity - 2 rollers to copy the shape of the piece. - Glue application amount is adjusted via a knob - Set up of the glue temperature. - Automatic guillotine for coiled material up to 3 mm x 45 mm. - PLC to set the lenght and the cut of the tape (by means of an encoder) for open and closed pieces. - Laser to make an easy programming of the cat for closed pieces with no need of measuring the pieces. - On/off automatic feeder of the panel. - Liftable working table for small panels. - Utilizes 2 x 800 w heating elements with electronic temperature control via thermos regulator. - On/Off automatic feeder of the panel. - Two rollers to copy the shape of the piece trimming station with pneumatic tilting, to allow edge-banding of big pieces. - Trimming unit with 2 motors 0,5 Kw high frequency 15000RPM with up/down and front copiers and manual lever to lift the motors approaching the pieces to be trimmed. - On/Off trimming unit - Two brazed cutters R=3, Z=6. - Turning table unit for large panels. - Holding arm with vacuum table to hold the big panels for edging and trimming. - Dimensions: 2000 x 2000 x 1700 mm. Weight Kg 600. - CE standards. For more information:
VITAP Spa Via Pisana 149 53036 POGGIBONSI / Siena / Italy Tel +39 0577 987511 /Fax +39 0577 981670 E-mail: email@example.com